"e.Laser, the new integrated Laser System for Embroidery Machines"
- CO2 sealed laser: 30/50 Watt
- cutting directly on caps frame if bundled with ProelTsi embroidery machine
- no offset (if integrated)
- full area frame available
- 110/220 VAC
- Userfriendly installation on any embroidery machine brand
- Possibility to upgrade the Happy embroidery machine in order to host it
The new Proel laser machine "e.Laser" works together with embroidery machine to create a very accurate and efficient system for fabric laser cutting and fabric laser engraving placed on the frame of the embroidery machine. This new laser system (patents pending solution) doesn't require electrical or mechanical changes on the embroidery machine.
The e.Laser can be mounted on any existing or brand new embroidery machine. The system makes an automatic control of laser power accordingly to the frame movement. The laser cut is very accurate because the laser source is perpendicular to the working plane having a very small laser spot. With this small laser spot you can cut any materials and even thick materials.
The laser system is able to work on the entire working area of embroidery frame. The "e.Laser" can be used for any type of production, from the small embroidery business, or craftsman studio (with a single head embroidery machine), to the large industry (multihead embroidery machines).
The e.Laser is a CO2 Laser machine equipped with a 30 or 50 Watt CO2 laser source. During the cycles of laser cutting and laser engraving, to the cutting head is sent a flow of air is sent to the cutting head in order to maintain clean the focusing lens, avoiding burnings on material: this in order to have very defined and clean cuts. The smokes produced during laser cutting or laser engraving, are evacuated by an external suction machine. The machine is equipped with a internal smoke suction device.
USABLE SOFTWARE for LASER CUTTING
Proel software for laser cutting FOCUSCUT III is the best program to manage laser cuts with e.Laser because the operator can use a lot of automatic tools for: auto-recognizing the embroidery edges, creating laser lettering and true type laser lettering, automatic creation of kiss cutting levels, etc. Possible also to manage the laser cuts with any client punching system.
1phase 220/240 Vac ±10% - 50/60Hz ±2%
|Absorbed power max||
< 70 dB (with internal fumes suction unit)
|Working area (WxD)||
the same of embroidery machine
top suction system
external and internal unit
|Laser source type||
CO2 - 10.6 µm - sealed type - RF Air liquid cooled
30W / 50W
|Laser beam delivery|
|Laser spot diameter||
depending on the embroidery machine
the same of embroidery machine
internal or external air / external gas
FOCUSCUT III or client punching
|Laser product Class||
class 1 (EN-60825-1:2003-02)
class I (USA-CDRH 21 CFR)
protective enclosures + laser beam stop access pane
The Manufacturer reserves the right to make modifications and improvements without prior warning
e.Laser with a single head embroidery machine
e.Laser on multihead embroidery machines
Have a look to the here above image galleries about works
performed by e.Laser in the field of