"Cometa, when a large cutting area is needed..."

 

DESCRIPTION

Laser Plotter Cometa is the large laser cutting machine of the Proel range for laser cutting and laser engraving. This machine, available in the 25, 50 or the 100 Watt version, is ideal for those who need to cut large sizes of material (up to 1600x850 mm) or even to cut material supplied in rolls.

The machine equipped with a CO2 Laser source of 25, 50, 100 or 200 Watt (air-cooled), a cutting head driven on two axes by powerful brushless motors, the possibility of assembling either a fixed cutting plane or a motorized cutting plane (for automatic loading/discharge of material to be worked/finished). Usable cutting area (1600x850 mm), external fume suction device that may be connected to a filtering unit, RS-232 interface for connection to a Personal Computer, possibility of control at three power levels (usually one for cutting and two for engraving), possibility of selecting two cutting modes: constant speed or variable speed for optimizing times, cleaning of the cutting head using air produced by an internal pump or with air produced by an external source or with gases specific for laser cutting (usually Nitrogen). Laser pointer for positioning the material to be used.

MAIN OPERATING FUNTIONS

  • Memorization of 10 different work profiles
  • Management of 6 languages for interfacing with the user
  • Management of ten levels of laser power
  • Setting of the cutting/engraving speed
  • Setting of the cutting head handling mode
  • Possibility of manually positioning the cutting head by means of the control panel
  • Possibility of manually handling the cutting plane advancement by means of the control panel
  • "Spot Laser" function for locating the laser ray on the material to be used
  • "Pause Cut" function
  • Possibility of continuing an unfinished job even after an electrical power failure
  • Self-diagnostic feature
  • Cutting assisted by a videocamera
  • Cutting of compositions (automatic repetition of the same cutting shape)
  • Management of different fume suction modes
  • Possibility of cutting the material in a straight line by means of the control panel
  • Work hours count
  • Work cycles count for each job
  • Display of the position of the cutting head (in X,Y coordinates)

TECHNICAL SPECIFICATION

 

Electrical input
1phase 230VAC ±10% - 50/60Hz ±2%
Absorbed power max.
2500 W
Dimensions (WxDxH)
2270x1770x1200 mm
Weight max.
470 Kg
Noise emission
< 70 dB (without fumes suction unit)
Drive motors type
brushless
Working area (WxD)
1600x850 mm (63"x33")
Cutting plane size(WxD)
1680x940 mm (66"x37")
Cutting plane type
metal grid / fixed
Fumes extraction
top and bottom suction system
Fumes suction
external free standing unit
Laser source type
CO2 - 10.6 µm - sealed type - RF Air liquid cooled
Laser power
25W / 50W / 100W / 200W
Laser beam delivery
mirrors and XY movable cutting head
Laser spot diameter
100 µm
Cutting speed
until to 1.2 m/s
Acceleration
15 m/s²
Resolution
2.5 µm
Optics cleaning
internal or external air / external gas
User interface
keyboard with display
Languages
EN / IT / FR / GE/ SP / PO
Software
Focuscut III - Videocut
Laser product Class
class 3R (EN-60825-1:2003-02)
class IIIa (USA-CDRH 21 CFR)
Safeties
protective enclosures + laser beam stop access panel with safety interlocks
Material positioning
red light laser pointer on the cutting head

The Manufacturer reserves the right to make modifications and improvements without prior warning

OPTIONS

Camera

With this device it is possible to recognize the position of labels inside the cutting area.Two markers are enough to determine the position and rotation of each part to cut

WORKING IMAGES

Have a look to the here above image galleries about works

performed by COMETA in the field of

 

Embroidery and Textile

Footwear and Leathergoods

Promotional and Trophy Market

WORKING VIDEO

Have a look to the here above video galleries about works

performed by COMETA in the field of

 

Embroidery and Textile

Footwear and Leathergoods

   I would like to receive more information about machine Cometa

Our Sites:

       
Proel TSI S.r.l.
Via Lino Zanussi, 20
33033 Codroipo (Udine)
Italia
Tel.(+39) 0432.815047 Fax (+39) 0432.905710
E-mail: info@proeltsi.com Web: www.proeltsi.com
P.IVA: IT 02741440305
Legal Info
Cookie Policy

Laser Cutting Machine - Laser Engraving Machinery - Embroidery Software - Embroidery Machines - Laser Plotter - Laser Bridge - Badges Cutting - Embroidery Laser - Laser Lettering - Applique Cutting - Galvanometric Laser - Textile Laser - Cad Cam Machinery - CO2 Laser Machines - CAD CAM Machines - Embroidery applique cutting - Embroidery Punching - Fabric laser cutting - Fabric laser marking - Jeans engraving - Laser alphabets - Laser for embroidery machines - Leather cutting - Leather engraving - Software for embroidery machines - Software for laser cutting - Stencil marking - Wood laser cutting - Wood laser engraving..........
Copyright © 1977-2017 - Proel TSI s.r.l. - All rights reserved